(MOT) ECM5687
ECM pellet stove auger motor. 120v, threescore Hz, vi RPM. 6 tapped 10-32 mounting holes. Clockwise rotation looking at shaft. Pellet stove replacement auger motor. Works on Bixby. Our motor is twice the torque of whatever other half-dozen RPM pellet motor on the market! 1/2" ten 1-1/2" shaft. 4-5/8"H x 2-iii/4"W 10 5-1/eight" deep. v.2 lbs. U.South. made. Includes fan blade.
$49 each - $45 (3+), $39 (36+), $thirty (144+)
(MOT) 201066
Precision Timer Co., Connecticut, USA sequential timer. 6 minute timer. 15 amp switch rating. 1/2 rpm, 120v. 2 spade terminals, 60 Hz. NOS.
$25 each - $23 (3+)
(MOT) M1145055.00
Leeson Air conditioning gear motor. Thermal protected. 230v / 480v @ 0.seven amps / 0.35 amps, 3 phase, 0.167 HP, threescore Hz, continuous duty, twoscore amb, twenty in. lb. torq, 480 rpm, 7:i ratio. 10" overall length. 4" x four-three/4" mounting confront. v/8"D x ane-ane/2"L round shaft with key. Alt. P/Due north: CM38T35NZ2A.
$435 each
(MOT) HLI2660-R2.4-GP56.3
Mettler-Toledo gear motor. 24 vdc. iv:1 ratio. 3000 rpm max. 2-one/8"D x four"L trunk, 8-3/4" overall length. 0.591"D ten ane.18"L circular shaft, keyed, threaded center diameter. Alt. P/Northward: 24124602.
$175 each
(MOT) MD3
Robbins & Myers gear motor. 115v AC, l/60 Hz, 0.31 amps. CCW rotation, 1.5 rpm. 3-1/8" ten three-1/8" x 2-seven/viii" behind panel depth. 7.94mm (0.313") x 17mm L shaft with flat. 2.39" x 2.39" mounting centers.
$69 each
(MOT) CHJ2H04160-Y
Sesame Motor Corp.1/two H.P. gear motor. 130v DC at 4 amp, 30.33 rpm with gear ratio of threescore to ane. Reversible rotation. 3/4" keyed shaft, 1-1/2" long. Motor 9-iii/iv"L x vi"W. v" x two-1/ii" mounting holes, 18" leads. Removable brushes. Alt P/N: G12H-400W.
$ninety each
(MOT) A108RC-1WR
Synchron gear timer motor. 110v AC @ 60 Hz, 3 watts. one RPH. 10 tooth gear. 1.93"D ten ane.30"H. 1.88" mounting centers. Circa 1969.
$23 each - $21 (vi+), $19 (25+)
(MOT) K35R
Synchron Model 630 synchronous motor. ten rpm, 110v @ 60 Hz. ane.48"D x 0.83"H body. 0.120"D x 1.14"L "D" shaft. 1.53" x 0.29" mounting centers. UL & CSA listed.
$19 each - $17.fifty (vi+), $sixteen (25+)
(MOT) GM9413F536
Pittman gear motor. 65.5 : 1 ratio. 26v DC. 1-15/16"D x iii-1/2"L body. 1/4" x 5/8"Fifty shaft. 1-1/2" mounting centers on caput taps.
$85 each - $75 (3+)
(MOT) Z37LA-v
Synchron motor. 110v @ 60 Hz, 5 watts. twoscore rpm. 0.54"L shaft with 5-twoscore male person thread. ii.0" 10 0.75" mounting centers. 1.93"D x 1.35"H.
$29 each - $27 (6+)
(MOT) CYQM-2341071
Barber-Coleman gear motor / pump assembly. 12v DC, reversible. 2-vii/8"L x 2"D. 1/four" ten iii/eight"L output shaft.
$25 each
(MOT) 180
Gear motor. 115v AC. 180 rpm.
$8 each
(MOT) CYMC-42700-661
Merkle-Korff gear motor. 12v DC, 3-ane/2 rpm, 27 mA no load. 4-1/2" overall length + shaft x 1-fifteen/16"D. 1/4" x 11/16"L "D" shaft. ane-1/2" mounting centers. 10-32 taps.
$65 each - $59 (6+)
(MOT) FYQF63300-l-five
Colman gear motor. 12v DC, 17 rpm. one-3/8"D ten ii-vii/8"L + shaft. 0.288"D x 0.73"L "D" shaft.
$25 each - $22 (6+), $twenty (25+)
(MOT) BDQC-5008651
Colman Products gear motor. 12v DC, 20 rpm. 1-15/16"D x three-ane/8" overall length + shaft. 1/4"D x 11/sixteen"Fifty shaft. 1.5" mounting center, 10-32 taps.
$19 each
(MOT) CYMC-42700-641
Merkle-Korff gear motor. 12v DC, 38 rpm. 1-15/16"D ten 4-ane/ii" overall length + shaft. 1/4" x 11/16"L "D" shaft. i-one/2" mounting centers, 10-32 taps.
$55 each - $49 (six+), $45 (25+)
(MOT) CYHL-82700-740
Barber Colman gear motor. 24v DC, 20 rpm. 2-eleven/16" x three" gear box. 4"Fifty body + shaft. 0.313"D x 0.875" shaft. 2-3/8" x 2-one/2" mounting centers.
$59 each
(MOT) EYQF-63600-740
Merkle-Korff gear motor. 24v DC @ 0.23 amps total load. 1.92 watts. iv internal gear steps. 119.53 rpm, 21.70 oz / in torque. 1.38"D x two.68"50 body. 0.186"D shaft, 0.734"L. 0.970" x 0.800" mounting centers on 3 - 6/32 threads.
$27.50 each - $25 (6+), $23 (25+)
(MOT) FYLM23510-16
Barber-Coleman gear motor. 27v DC, 0.35 amps, 9.ii rpm, 10 lb / in torque. Continuous duty. ane-three/8"D x iii-1/4"50. 0.183" foursquare shaft. 0.848" mounting center, front head threads. NSN: 6105-881-7353.
$85 each - $79 (iii+)
(MOT) 521-0103
Frederick Motor Co. gear motor. 120v, threescore Hz, twenty rpm. 1.84"D x 0.89"H. 1/8" 10 0.35"50 shaft. 1.87" mounting centers.
$23 each - $21 (6+), $19 (twenty+)
(MOT) 415A6016-3
TRW Globe gear motor. 24v DC, 100 oz. in. torque. Speed: 22 rpm nominal. Gear ratio: 240:1, 18 rpm. 1.42"D ten 2.8"L torso. 0.187"D x 0.41"L shaft. 0.904" - 0.778" mounting centers on three - #four threads.
$15 each - $xiii.75 (3+)
(MOT) GM9214E056-R2
Ametek / Pittman gear motor. Max 50 rpm @ 24vDC. 127.7:1 ratio. Minimum speed @ 4vDC. 25 watts. two" x 2" mounting plate. 1.62" mounting centers. ane/4" (six.3mm) 10 0.66"L shaft. 3.8" long.
$165 each - $150 (3+)
(MOT) SX-L71BZ
Cramer synchronous gear motor. ane/five RPM / 115v AC / 60 Hz / 3w. 2-one/16" c-c mounting positions and right angle from shaft. i/8"d ten 1"50 shaft. Used-removed.
$15 each
(MOT) 17320
Precision timer. 24 hour per revolution. Two SPDT fifteen amp switches. 24vAC, 60 hz. Cams activated switches @ 12 hour point. 12 hour on-12 60 minutes off. 1/4" shaft output. 3-1/8" x ii-one/iv" ten two-1/iv"H.
$25 each - $23 (iii+)
(MOT) CYQC-43200-41-5
Colman Motor Products Inc DC gear motor. 12 tooth gear.
Motor Specifications:
• Rated for: 24v DC, 0.5 amp, 32 rpm
• Stall torque: 150 oz.-in.
• Body dimensions: 2"D x three-1/iv"L, 4" overall length
• Shaft dimensions 1/iv" "D" shaft
$45 each
(MOT) 82748303
Crouzet gear motor. 24v DC motor has 5,800 rpm. 31/09; RAP: 24.19, Sens: 2. 9.53mm diameter double flatted shaft. 2-iii/four" x 3-five/eight" x 4-1/4" max dimensions. 61mm ten 61mm mounting centers. Made in France.
$85 each
(MOT) B00005ASY
Gear motor assembly. 24 vac, reversible. This assembly has been removed from mill new, never used equipment. Includes sub-chassis, 1k - 10 plough positioning pot, capacitor and resistor. Many uses such as advancing rotary switches, variable inductor drives, etc. 3-ane/2" ten iv-one/four" x iv"H.
$85 each
(IRV) B00003
Mounted in a 4-i/4" x 3-1/2" x 5"H aluminum frame with mounting tabs. Motor measures: 2-v/8" x 3-1/4" x iv". 1/4"D shaft.
$59 each
(MOT) B00005
24 vac (l/60 Hz) operated motor is used in the SRS Antenna Couplers to tune inductors, switches and vacuum caps. Salubrious torque manages any component in their line. 70 rpm at 24 vac 60 Hz, with total rated load. Lower voltage to lower speed as well decreases torque. Double 1/4" shaft exits each side of gearbox. Mounts past threaded post sockets on forepart spaced in a 1-9/sixteen" foursquare. Max dimensions iii-3/4" high 10 2-seven/8" wide x iii-i/2" deep from mounting posts to electrical terminals on dorsum.
Suitable for almost any remote tuning application of a vacuum cap, rotary inductor or ceramic switch.
MK Model QFS3420R. Includes starting cap and wiring instructions. Express quantity!
$79 each
(MOT) 712750-1
TRW Globe gear motor # 5A1951. 26.5 vdc. 2.7 rotation turns counter and stop. DC inputs include RFI filters. ii-one/2" diameter, 140 tooth gear. NSN: 6105-00-860-6067.
$150 each
(MOT) East-1033RP
General Traffic Equipment Corp. dial motor replacement kit. 110v, sixty Hz. 2 rpm motor. This assembly has a Synchron JC248RC-5-6. Includes Aromat HC1-AC115V SPDT relay. iii/16" (0.187") shaft, includes 18 tooth gear.
$29 each - $26 (half-dozen+)
(MOT) EM4046-i
Vickers aircraft motor. 400 Hz, three stage. Angle drive gear motor. 115/200v, ii amps, HP: 0.06, 34.5 rpm. 2-1/iv"D x 6-i/ii"L, 0.506" inside diameter shaft housing. Also Weber P/Due north: 839645-401.
$275 each - $249 (3+)
(MOT) MP4851-0-0-1
Barber-Coleman motorized actuator, damper motor. 240v, 60 Hz, 0.22 amps, 28 watts. 1/2" spline shaft. 5-1/four" x five-1/2" x 7"H. New, unused. Harris P/N: 442-0044-000.
$199 each
(MOT) 60321023-01
Gear motor mounting plate. Aluminum. 2-ane/ii" foursquare.
$nine each
(MOT) SP547
Hurst motor. 50 bicycle, 2/v rpm, 5 watt, 115 vac. 3 wires. 2-1/2" diameter x 2" deep body. 0.186"D x 2-1/two"L circular shaft. three mounting holes, two-three/8" c-c. Reversible. Includes capacitor.
*** SOLD OUT ***
(MOT) N16-RK-38510
Right bending drive has a high torque 24 rpm output. 115 vac (threescore Hz) 1/6 hp, two.viii amps, 1 phase, 1725 rpm Master Electric motor drives this U.S. Navy radar antenna array rotator. Output shaft is middle, vertical. Too incorporates manual adapt wheel (left). Tripod mounting. These heavy-duty turntable rotators will turn a brick outhouse 24 times a minute! 230 pound crate weight. New, unused. Just a few on manus.
$595 each - $450 (3+)
(MOT) MA40-7040
Invensys Dura Drive jump return actuator. Ii position actuator 35 / IN-LB (4 Nm). 120 vac, half-dozen.four va, iii.8 watts. Adjustable terminate upward to 95º rotation. Remove power at any point in rotation and actuator returns to start. V-clamp accommodates shaft up to 5/eight" diameter. Measures ii-1/two" x 4" x vii" high. Bully for projects similar HVAC dampers, visual brandish animation and repeat high torque operations that require a 90º rotation or less. Normally sells for over $155. Our toll...
$75 each - $69 (6+), $60 (25+)
(MOT) KYC-23B2A1
Bodine gear motor, (801VA079). 115 vac, 60 Hz, 8.v watts, 300 rpm. Torque = one.7 in. oz. Includes capacitor. 1/four" ten 1/2"L shaft. 2-1/4" x 2-1/4" x ii-1/2"L. Harris P/North: 436-0081-000.
*** SOLD OUT ***
(MOT) P11HCC67
Cramer synchronous gear motor. 24 vac, ii.7w, 30 rpm. 1-vii/8" diameter body, 1-vii/eight" center to eye mounting ears. 3/16" flatted shaft, three/eight"50.
*** SOLD OUT ***
